InfoSWMM 14.5 Update 8 (Multiple Languages) is Now available for User Download – Update for 2017

I am Updating this post for the new InfoSWMM v14.5 Update 8 for April 20, 2017,  This update has the new EPA SWMM 5.1.012 engine and RDII Analyst v2.

Please note that the latest releases of InfoSWMM 14.5 Update 8 (Multiple Languages) products are now available on the Website for download
UPDATE InfoSWMM 14.5 Update 8 (Multiple Languages) Update 4/20/2017
FULL SETUP InfoSWMM 14.5 Update 8 (Multiple Languages) Setup 4/20/2017
Learning Materials Introduction to InfoSWMM (3-minute, English ver., by Innovyze) & InfoSWMM Import and Export from SWMM 5 (2-minute, English ver., by Innovyze)
Vertical Setup 2D Setup 4/20/2017
CapPlan Sewer Setup 4/20/2017
InfoSWMM SFEM Setup 4/20/2017
InfoSWMM SUSTAIN Setup 4/20/2017

 

System Requirements
Compatible 32-bit OS: Windows Server 2008 R2, Windows Server 2012 R2, Windows 7/8/8.1/10 pro or above
Compatible 64-bit OS: Windows Server 2008 R2, Windows Server 2012 R2, Windows 7/8/8.1/10 pro or above
Compatible ArcGIS: 10.0, 10.1, 10.2, 10.3, 10.4, and 10.5 (Check your PC ability to run ArcGIS)
Prerequisites: Microsoft Visual C++ 2008 Redistributable – x64 v9.0.30729.17/Microsoft Visual C++ 2008 Redistributable – x86 v9.0.30729.17Microsoft Visual C++ 2010 Redistributable – x86 v10.0.40219.1/Microsoft Visual C++ 2010 Redistributable – x64 v10.0.40219.1 and Windows Internet Explorer 7 or later
Hardware Requirements: CPU Speed: 2.2 GHz minimum or higher; Hyper-threading (HHT) or Multi-core recommended
Processor: Intel Dual Core, Core 2 Duo, Xeon, or greater; SSE2 (or greater)
Memory/RAM: 4 GB or higher
Screen Resolution: 1024 x 768 recommended or higher at Normal size (96dpi)
Disk Space: 4 GB of free space to accommodate a full setup installation and additional disk space – keep as much free disk space available as possible. Its virtual memory system needs additional free disk space when working on large projects
Video/Graphics Adapter: 64 MB RAM minimum, 256 MB RAM or higher recommended. NVIDIA, ATI and INTEL chipsets supported
Networking Hardware: Simple TCP/IP, Network Card or Microsoft Loopback Adapter is required for the License Manager
Language: Support Multiple Languages (English, French: Menu, German: Menu & Dialogue, Italian: Menu, Spanish: Menu, and Turkish: Menu) – To change display languages: Control Panel->Region and Language -> Formats tab -> select [Language] from the Format select box. (For Help: Changing the display of your Language Setting)

I am Updating this post for the new InfoSWMM v14.5 updates on January 14, 2017

Please note that the latest releases of InfoSWMM 14.5 Update 5 (Multiple Languages) products are now available on the Website for download
UPDATE InfoSWMM 14.5 Update 5 (Multiple Languages) Update 12/29/2016
FULL SETUP InfoSWMM 14.5 Update 5 (Multiple Languages) Setup 12/29/2016
Learning Materials Introduction to InfoSWMM (3-minute, English ver., by Innovyze) & InfoSWMM Import and Export from SWMM 5 (2-minute, English ver., by Innovyze)
Vertical Setup 2D Setup 12/29/2016
CapPlan Sewer Setup 12/29/2016
InfoSWMM SFEM Setup 12/29/2016
InfoSWMM SUSTAIN Setup 12/29/2016

 

System Requirements
Compatible 32-bit OS: Windows Server 2008 R2, Windows Server 2012 R2, Windows 7/8/8.1/10 pro or above
Compatible 64-bit OS: Windows Server 2008 R2, Windows Server 2012 R2, Windows 7/8/8.1/10 pro or above
Compatible ArcGIS: 10.0, 10.1, 10.2, 10.3, 10.4, and 10.5(Check your PC ability to run ArcGIS)
Prerequisites: Microsoft Visual C++ 2008 Redistributable – x64 v9.0.30729.17/Microsoft Visual C++ 2008 Redistributable – x86 v9.0.30729.17Microsoft Visual C++ 2010 Redistributable – x86 v10.0.40219.1/Microsoft Visual C++ 2010 Redistributable – x64 v10.0.40219.1 and Windows Internet Explorer 7 or later
Hardware Requirements: CPU Speed: 2.2 GHz minimum or higher; Hyper-threading (HHT) or Multi-core recommended
Processor: Intel Pentium 4, Intel Core Duo, or Xeon Processors; SSE2 (or greater)
Memory/RAM: 2 GB or higher
Screen Resolution: 1024 x 768 recommended or higher at Normal size (96dpi)
Disk Space: 500 MB of free space to accommodate a full setup installation and additional disk space – keep as much free disk space available as possible. Its virtual memory system needs additional free disk space when working on large projects
Video/Graphics Adapter: 64 MB RAM minimum, 256 MB RAM or higher recommended. NVIDIA, ATI and INTEL chipsets supported
Networking Hardware: Simple TCP/IP, Network Card or Microsoft Loopback Adapter is required for the License Manager
Language: Support Multiple Languages (English, French: Menu, German: Menu & Dialogue, Italian: Menu, Spanish: Menu, and Turkish: Menu) – To change display languages: Control Panel->Region and Language -> Formats tab -> select [Language] from the Format select box. (For Help: Changing the display of InfoSWMM Language Setting)

I am Updating this post for the new InfoSWMM v14 updates on September 1st, 2015

InfoSWMM 14.0 is now available for user download

Update InfoSWMM 14.0 Upgrade 8/7/2015
Learning Material Introduction to InfoSWMM (3-minute, English ver., by Innovyze) & InfoSWMM Import and Export from SWMM 5 (2-minute, English ver., by Innovyze)
Vertical Setup 2D Setup 8/7/2015
CapPlan Sewer Setup 8/7/2015
InfoSWMM SFEM Setup 8/7/2015
InfoSWMM SUSTAIN Setup 8/7/2015

InfoSWMM V14 New Features!

  1. The Innovyze(R) team is pleased to once again offer many great upgrades to our world-class
    SWMM5 based modeling software.  InfoSWMM H2OMap SWMM Version 14  brings you several
    advanced features and reiterates our dedication to bring you the best and most useful
    wet infrastructure modeling products in the world.  InfoSWMM v14 is based on EPA SWMM 5.1.009 with some features of EPA SWMM 5.1.010
  2. A new Modified Rational Method that reads IDF tables and allows user-defined time
    of concentration for each subcatchment.
  3. InfoSWMM, InfoSWMM Sustain, InfoSWMM 2D and InfoSWMM blogs in Spanish, French and
    Italian.
  4. New monthly adjustments for hydraulic conductivity used for rainfall infiltration
    and exfiltration from storage nodes and conduits.
  5. A new feature that allows LID drains to send their outflows to a different node or
    subcatchment than the parent subcatchment in which they were placed.
  6. A new option for conveyance system outfall nodes to send their outflows onto a subcatchment,
    to simulate irrigation or complex LID treatment options.
  7. A new LID practice, Rooftop Disconnection, that allows users to explicitly model
    roof runoff with an optional limit on the flow capacity of downspouts.
  8. A new optional soil layer to Permeable Pavement or Porous Pavement LID’s, enabling
    modeling of a sand filter or bedding layer beneath the pavement.
  9. Several new built-in variable names for use in custom groundwater flow equations
    for porosity, unsaturated hydraulic conductivity, infiltration rate and percolation
    rate.
  10. A new Groundwater Summary table to report multiple groundwater statistics for each
    subcatchment with groundwater definitions.
  11. Minimum Variable Time Step which limits the smallest time step that can be computed
    under variable time stepping for dynamic wave flow routing. In previous releases
    this figure was fixed at 0.5 seconds, which remains the default. The smallest value
    now available is 0.001 sec.
  12. An improved Node Depth Summary report table that shows the maximum depth recorded
    at the Reporting Time Step so it can be compared to the maximum depth attained over
    all routing time steps, also shown in the table.
  13. A new variable “Node Volume” added to the Rule Control premises.
  14. A new extension on Rule Control premises that allows comparison of a node or link
    variable at two different locations (e.g. IF NODE 123 HEAD > NODE 456 HEAD).

System Requirements

Compatible 32-bit OS: Windows Server 2008 R2, Windows Server 2012 R2, Windows 7/8/8.1/10 pro or above  Note that InfoSWMM and H2OMAP SWMM v14.0 are not compatible with Windows XP
Compatible 64-bit OS:

 

Windows Server 2008 R2, Windows Server 2012 R2, Windows 7/8/8.1/10 pro or above  Note that InfoSWMM and H2OMAP SWMM v14.0 are not compatible with Windows XP
Prerequisites: Microsoft Visual C++ 2008 Redistributable – x64 v9.0.30729.17/Microsoft Visual C++ 2008 Redistributable – x86 v9.0.30729.17Microsoft Visual C++ 2010 Redistributable – x86 v10.0.40219.1/Microsoft Visual C++ 2010 Redistributable – x64 v10.0.40219.1 and Windows Internet Explorer 7 or later
Hardware Requirements: CPU Speed: 2.2 GHz minimum or higher; Hyper-threading (HHT) or Multi-core recommended
Processor: Intel Pentium 4, Intel Core Duo, or Xeon Processors; SSE2 (or greater)
Memory/RAM: 2 GB or higher
Screen Resolution: 1024 x 768 recommended or higher at Normal size (96dpi)
Disk Space: 500 MB of free space to accommodate a full setup installation and additional disk space – keep as much free disk space available as possible. Its virtual memory system needs additional free disk space when working on large projects
Video/Graphics Adapter: 64 MB RAM minimum, 256 MB RAM or higher recommended. NVIDIA, ATI and INTEL chipsets supported
Networking Hardware: Simple TCP/IP, Network Card or Microsoft Loopback Adapter is required for the License Manager

Arc GIS Compatibility

 GIS Versions: 10.0, 10.1, 10.2 and 10.3 (Check your PC ability to run ArcGIS)

New Features

 GIS Gateway Added Junction Inlets to the import categories of GIS Gateway. This now allows users to import thousands of inlets into their larger models. The two DLL’s have to be copied to the common and bin directories respectively.
 Calibration Data An Improved Interpolation of the Calibration time series when the time series exceeds the number of plotted points in InfoSWMM or 8808 points. This will allow better matching between the InfoSWMM report time step and the time series interval in the Calibration Data Set on the same graph in Report Manager.
 2D Animation Speed Improvement for the 2D Map and 3D Display of the InfoSWMM 2D simulation results on the mesh using the InfoSWMM Animation Viewer in the Tools Menu

 

 

InfoSWMM 12.0 Update 8 is now available for user download

Update InfoSWMM/Suite 12.0 Update 008 (47.32 MB), 07/09/2013 
Upgrade InfoSWMM/Suite 12.0 Upgrade (95.07 MB), 08/07/2012 
Vertical Setup 2D Setup 7/9/2013
CapPlan Sewer Setup 7/9/2013

System Requirements

Compatible 32-bit OS: Windows XP Pro SP2 or above, Windows Server 2003 SP2, Windows Vista, Windows Server 2008 R2, Windows 7 Pro or above
Compatible 64-bit OS: Windows XP Pro SP2 or above, Windows Server 2003 SP2, Windows Vista, Windows Server 2008 R2, Windows 7 Pro or above
Prerequisites: Microsoft Visual C++ 2008 Redistributable – x64 v9.0.30729.17/Microsoft Visual C++ 2008 Redistributable – x86 v9.0.30729.17
Hardware Requirements: CPU Speed: 2.2 GHz minimum or higher; Hyper-threading (HHT) or Multi-core recommended
Processor: Intel Pentium 4, Intel Core Duo, or Xeon Processors; SSE2 (or greater)
Memory/RAM: 2 GB or higher
Screen Resolution: 1024 x 768 recommended or higher at Normal size (96dpi)
Disk Space: 500 MB of free space to accommodate a full setup installation and additional disk space – keep as much free disk space available as possible. Its virtual memory system needs additional free disk space when working on large projects
Video/Graphics Adapter: 64 MB RAM minimum, 256 MB RAM or higher recommended. NVIDIA, ATI and INTEL chipsets supported
Networking Hardware: Simple TCP/IP, Network Card or Microsoft Loopback Adapter is required for the License Manager

Arc GIS Compatibility

 GIS Versions: ArcGIS 9.x, 10.0, and 10.1 (Check your PC ability to run ArcGIS)

New Features

 GIS Gateway Added Junction Inlets to the import categories of GIS Gateway. This now allows users to import thousands of inlets into their larger models. The two DLL’s have to be copied to the common and bin directories respectively.
 Calibration Data An Improved Interpolation of the Calibration time series when the time series exceeds the number of plotted points in InfoSWMM or 8808 points. This will allow better matching between the InfoSWMM report time step and the time series interval in the Calibration Data Set on the same graph in Report Manager.
 2D Animation Speed Improvement for the 2D Map and 3D Display of the InfoSWMM 2D simulation results on the mesh using the InfoSWMM Animation Viewer in the Tools Menu
Share this post!

    About Robert Dickinson

    Robert Dickinson is a Product Sector Leader with Innovyze in the USA for InfoSewer, InfoSWMM and H2OMAP SWMM. He has over 42+ years experience in modeling the key hydrologic, water quality and hydraulic processes involved in urban and surburban drainage design and analysis. He has been very lucky to work with many talented engineers and scientists in his professional life at the University of Florida, XP Software, CDMSmith, the US EPA and at Innovyze Inc which allows him to offer worldwide support, training and sales/adaptation help for the Innovyze Products InfoSWMM, InfoSewer, InfoSWMM 2D, H20Map SWMM, SWMMLive and SWMM features in ICM and ICM SE. Short Time History: Product Sector Leader with @Innovyze for InfoSWMM / InfoSewer, 46+ years w/ SWMM3/4/5 11+ Years w/ @Innovyze! 8+ years @CDMSmith 9 years w/ XPSWMM 17 years @UF Very long bio - https://www.linkedin.com/pulse/my-history-various-versions-swmm-swmm3-swmm4-swmm5-robert-dickinson?trk=prof-post
    This entry was posted in H2OMAP SWMM, InfoSWMM, Updates and tagged , , . Bookmark the permalink.