Monthly Archives: August 2015

A quick way to check whether a river bank is connected to 2D

Occasionally we get models sent to the support team where the river banks are not correctly or completely connected to the 2D domain which represents the out-of-bank flow.  The following theme will allow you to theme those 2D elements which … Continue reading

Posted in InfoWorks ICM | Tagged , , , , , | Comments Off on A quick way to check whether a river bank is connected to 2D

Don’t forget your 2D Initial Conditions!

A couple of recent 2D models have been seen where a tidal boundary is being represented and results on the 2D mesh show water surface elevations greater than the tidal level…this is due to poor model schematisation and in particular the … Continue reading

Posted in InfoWorks CS, InfoWorks ICM, InfoWorks RS, InfoWorks SD | Tagged , , , , , | Comments Off on Don’t forget your 2D Initial Conditions!

The Advanced Force Network Support Solution for both EPS and Steady State Modeling – Update for 2017

The Advanced Force Network Support allows the simulation of multiple upstream and downstream force mains entering and leaving one chamber junction during both Steady State and Extended Period Dynamic Simulation or EPS solutions in InfoSewer. All of the force mains, pumps, … Continue reading

Posted in H2OMAP Sewer, InfoSewer | Tagged | Comments Off on The Advanced Force Network Support Solution for both EPS and Steady State Modeling – Update for 2017

Throttle Control Valves – A few clarifying notes on their use in InfoWater, H2OMAP, and H2ONET

Throttle control valves are one feature within the software that may or may not get used as much by different modelers as other valve types, but are another tool that in the modeler’s toolbox that can be used. Due to … Continue reading

Posted in H2OMAP Water, H2ONET, InfoWater | Tagged , , , , | Comments Off on Throttle Control Valves – A few clarifying notes on their use in InfoWater, H2OMAP, and H2ONET

Innovyze’s ‘Working with Water’ Seminar 2015 Regional NSW, Australia

Innovyze’s ‘Working with Water’ Seminar was held at three different regional NSW locations namely Wagga Wagga, Dubbo and Tamworth on 3-5 August 2015. Delegates from mostly regional Councils attended to share knowledge and learn about latest technology towards smart water and wastewater … Continue reading

Posted in Events, H2OMAP Water, InfoWorks WS | Comments Off on Innovyze’s ‘Working with Water’ Seminar 2015 Regional NSW, Australia

Tips & Tricks; GeoPlan Properties & Themes; Only Show Displayed Layers

Just a quick post with my latest tip and trick. Too many layers in the GeoPlan Properties & Themes Dialog Box? Then simply hide the ones not displayed on the GeoPlan by checking the ‘Only Show Displayed Layers’ checkbox. This makes … Continue reading

Posted in InfoNet, InfoWorks ICM | Comments Off on Tips & Tricks; GeoPlan Properties & Themes; Only Show Displayed Layers

SQL: Pulling Out the TIME from A Date Field.

The TIMEPART(date) function returns the time of a date/time field as a number in minutes. As is explained in the HELP file, given a date 01/01/2015 12:34, the function returns 754. This is the number of minutes after midnight. As … Continue reading

Posted in InfoNet, InfoWorks ICM | Comments Off on SQL: Pulling Out the TIME from A Date Field.