Monthly Archives: April 2016

Semi- and fully-distributed modelling with InfoWorks ICM

InfoWorks ICM includes many of the latest modelling capabilities in the market and fully-distributed (FD) modelling is one of these abilities. Usually, urban stormwater models are semi-distributed (SD), i.e. are based on subcatchment units, where rainfall is applied and transformed … Continue reading

Posted in InfoWorks ICM | Tagged , , , | Comments Off on Semi- and fully-distributed modelling with InfoWorks ICM

What to do with an Unexpected number of bytes read from file error in InfoWorks ICM

Very occasionally a user may open their InfoWorks ICM simulation results and obtain an error suggesting that there was an ‘Unexpected number of bytes read from a file’. The file referred to is the .iwrcache file.  When you open simulation … Continue reading

Posted in InfoWorks ICM | Tagged , , | Comments Off on What to do with an Unexpected number of bytes read from file error in InfoWorks ICM

Dr. Paul Boulos Attends the AMIDEAST Gala Dinner in Lebanon, Helps Raise $170K in Scholarships for Needy Students

During his short visit to Lebanon, Dr. Paul Boulos attended the AMIDEAST fundraising dinner at the Phoenicia Intercontinental hotel in Beirut. The event hosted over 500 VIP guests and raised over $170K in needy scholarships! This amount will provide unprecedented … Continue reading

Posted in Events | Comments Off on Dr. Paul Boulos Attends the AMIDEAST Gala Dinner in Lebanon, Helps Raise $170K in Scholarships for Needy Students

New Quick Run Button in RDII Analyst for Fast RTK Calibration

One of the most powerful InfoSWMM and H2OMAP SWMM Application Tools from Innovyze is RDII Analyst.  RDII Analyst will separate out the Groundwater base flow, Dry Weather Flow (DWF), DWF Patterns, estimate the Wet Weather flow component or RDII  Rainfall … Continue reading

Posted in H2OMAP SWMM, InfoSWMM, SCADAWatch | Tagged | Comments Off on New Quick Run Button in RDII Analyst for Fast RTK Calibration

InfoWorks ICM v6.5.7 (Build 13019) is now available for user download

InfoWorks ICM v6.5.7 (Build 13019) is now available for user download ICM Workgroup Client Innovyze Workgroup Client 6.5.7.13019 Setup (x86 and x64) ICM Remote Agent Innovyze Remote Agent 6.5.7.13019 Setup (x64 only) Workgroup Data Server Innovyze Workgroup Data Server 6.5.7.13019 … Continue reading

Posted in InfoWorks ICM, Updates | Tagged , | Comments Off on InfoWorks ICM v6.5.7 (Build 13019) is now available for user download

Dr. Paul Boulos Presents the Agreement of Cooperation between the American Society of Civil Engineers and the Federation of Lebanese Engineers

On April 7, 2016, Dr. Paul Boulos presented the Agreement of Cooperation between the American Society of Civil Engineers (ASCE) and the Federation of Lebanese Engineers (FLE). Present at this auspicious occasion were Mr. Khaled Chehab, FLE President, Dr. Abdulmenhem … Continue reading

Posted in Events | Comments Off on Dr. Paul Boulos Presents the Agreement of Cooperation between the American Society of Civil Engineers and the Federation of Lebanese Engineers

Using multiple GPU Cards with InfoWorks ICM

Custom GPU Settings – available since InfoWorks ICM v6.0 When a Desktop or Workstation contains multiple GPU cards, the 2D engine in InfoWorks ICM will cycle through all the available cards and pick one to use for each simulation. The criteria to select a card is … Continue reading

Posted in Information Technology, InfoWorks ICM | Tagged , | Comments Off on Using multiple GPU Cards with InfoWorks ICM

InfoWorks ICM appearing in a number of recent academic publications

    In the past couple of years there have been a number of academic papers highlighting InfoWorks ICM and various modelling approaches which can be utilised within the software.  Below is a small list of some recent ones which may … Continue reading

Posted in InfoWorks ICM | Tagged , , , , , , , | Comments Off on InfoWorks ICM appearing in a number of recent academic publications