Tag Archives: ICM

InfoWorks ICM RiskMaster: Calculation of Event Probability and Annual Damage

ICM RiskMaster allows 2D hydraulic results from InfoWorks ICM to be combined with economic data to allow damages to be quantified. Traditionally flood management policies have been based upon the design standard philosophy, where policy makers decide on an appropriate … Continue reading

Posted in InfoWorks ICM, Wastewater | Tagged , , , , , , | Comments Off on InfoWorks ICM RiskMaster: Calculation of Event Probability and Annual Damage

Adding an HGL Line From Another Simulation to a Long Section in ICM

When viewing the HGL line on a long section profile, you may wish to compare it to the HGL line from another simulation on the same profile plot. To do this: Open one long section from one set of simulation … Continue reading

Posted in InfoWorks ICM | Tagged , , , | Comments Off on Adding an HGL Line From Another Simulation to a Long Section in ICM

What To Do If You Get ‘Record Not Found In Local Datastore’ Error

Once in a while, when committing changes to a network in InfoWorks ICM or InfoNet , you may receive an error such as this one: There are several reasons why this problem may have occurred. Innovyze has resolved many of these … Continue reading

Posted in InfoNet, InfoWorks ICM | Tagged , , , | Comments Off on What To Do If You Get ‘Record Not Found In Local Datastore’ Error

InfoWorks ICM v6.5.7 (Build 13019) is now available for user download

InfoWorks ICM v6.5.7 (Build 13019) is now available for user download ICM Workgroup Client Innovyze Workgroup Client 6.5.7.13019 Setup (x86 and x64) ICM Remote Agent Innovyze Remote Agent 6.5.7.13019 Setup (x64 only) Workgroup Data Server Innovyze Workgroup Data Server 6.5.7.13019 … Continue reading

Posted in InfoWorks ICM, Updates | Tagged , | Comments Off on InfoWorks ICM v6.5.7 (Build 13019) is now available for user download

Using multiple GPU Cards with InfoWorks ICM

Custom GPU Settings – available since InfoWorks ICM v6.0 When a Desktop or Workstation contains multiple GPU cards, the 2D engine in InfoWorks ICM will cycle through all the available cards and pick one to use for each simulation. The criteria to select a card is … Continue reading

Posted in Information Technology, InfoWorks ICM | Tagged , | Comments Off on Using multiple GPU Cards with InfoWorks ICM

InfoWorks ICM : Soft Licence Key Selection Method

If you have multiple Soft Licence Keys for InfoWorks ICM it’s likely that they will all be hosted by a single instance of the Innovyze Floating Licence Manager (FLM). The end-user accesses a particular floating licence key by referencing its … Continue reading

Posted in Information Technology, InfoWorks CS | Tagged , | Comments Off on InfoWorks ICM : Soft Licence Key Selection Method

InfoWorks ICM : Network Dongle Selection Method

If you have multiple Network Dongles for InfoWorks ICM they can all be hosted in the same physical server. The end-user accesses a particular device by referencing the dongles Hardware Serial Number.  This is a unique 10 digit number set … Continue reading

Posted in Information Technology, InfoWorks ICM | Tagged , | Comments Off on InfoWorks ICM : Network Dongle Selection Method

Floating Licences : Network Dongles vs. Software Keys

Floating licences can be deployed via either Hardware Locks (Network Dongles) or our in-house software based authentication system. Some consider that Hardware Locks provide a more robust solution for organisations with complex network infrastructure and they are currently the preferred solution … Continue reading

Posted in FloodWorks, InfoNet, InfoNet Mobile, Information Technology, InfoWorks CS, InfoWorks ICM, InfoWorks RS, InfoWorks SD, InfoWorks WS, IWLive | Tagged , , , , | Comments Off on Floating Licences : Network Dongles vs. Software Keys

New Feature in ICM 6.5 to Copy a Specific Committed Version of a Network

One of the most useful features within InfoWorks ICM is the version control which allows uses to build their model iteratively, committing (Saving to the master database) at regular intervals and keeping a full QA of the model commit history … Continue reading

Posted in InfoWorks ICM | Tagged , , , , , , , , | Comments Off on New Feature in ICM 6.5 to Copy a Specific Committed Version of a Network

InfoWorks ICM v6.5.2 (Build 13012) is now available for user download

InfoWorks ICM v6.5.2 (Build 13012) is now available for user download ICM Workgroup Client Innovyze Workgroup Client 6.5.2.13012 Setup (x86 and x64) ICM Remote Agent Innovyze Remote Agent 6.5.2.13012 Setup (x64 only) Workgroup Data Server Innovyze Workgroup Data Server 6.5.2.13012 … Continue reading

Posted in InfoWorks ICM, Updates | Tagged , | Comments Off on InfoWorks ICM v6.5.2 (Build 13012) is now available for user download