Tag Archives: InfoSWMM

Creating a “zero byte” MXD file to use with any version of ArcGIS

Posted on November 1, 2016 by Patrick Moore

One of the challenges sometimes faced when sharing any of Innovyze non-workgroup products that run in ArcGIS such as InfoWater, InfoMaster, InfoSewer, and InfoSWMM is when different users are using different versions of ArcGIS.  When you attempt to open a model that was saved … Continue reading →

Posted in InfoSewer, InfoSurge, InfoSWMM, InfoWater | Tagged , , , , , | Comments Off on Creating a “zero byte” MXD file to use with any version of ArcGIS

New – Five Infiltration Options Now in InfoSWMM v14.5 and H2OMap SWMM v14.5 for Watershed Modeling – Updated for 2017

Posted on November 17, 2015 by Robert Dickinson

Infiltration from the pervious area is a marvelous and from a runoff volume and runoff peak perspective a vital process in modeling the hydrology and ultimately the hydraulics of your Watersheds.  Figure 1 shows the five options available in InfoSWMM … Continue reading →

Posted in H2OMAP SWMM, InfoSWMM | Tagged , , , | Comments Off on New – Five Infiltration Options Now in InfoSWMM v14.5 and H2OMap SWMM v14.5 for Watershed Modeling – Updated for 2017

InfoSWMM, H2OMAP SWMM, InfoSWMM SA Fully Supports the EPA SWMM-CAT Climate Change Adjustment Tool

Posted on February 17, 2015 by Robert Dickinson

Introduction The Innovyze products InfoSWMM and H2OMAP SWMM are always based on the current version of EPA SWMM 5 (the current version is 5.1.010) and we are pleased to announce that the current version of both InfoSWMM and H2OMAP SWMM … Continue reading →

Posted in H2OMAP SWMM, InfoSWMM | Tagged | Comments Off on InfoSWMM, H2OMAP SWMM, InfoSWMM SA Fully Supports the EPA SWMM-CAT Climate Change Adjustment Tool

Vertical Roughness Differentiation in InfoSWMM for a Link

Posted on February 17, 2015 by Robert Dickinson

The Vertical Roughness Threshold allows the user of InfoSWMM or H2OMAP SWMM to have a simple differentiation of roughness in a link.  The Threshold depth which is entered as a fraction of the total link depth allows the simulation of … Continue reading →

Posted in H2OMAP SWMM, InfoSWMM | Tagged | Comments Off on Vertical Roughness Differentiation in InfoSWMM for a Link

InfoSWMM and H2OMAP SWMM and their Relationship to FEMA Approved SWMM 5 Engines – Updated for 2017

Posted on February 5, 2015 by Robert Dickinson

The purpose of this note is to show how InfoSWMM is related to various SWMM 5 engines. InfoSWMM is a ESRI Arc Map Interface to the properties of the SWMM 5 engine using model development tools created by Innovyze for … Continue reading →

Posted in H2OMAP SWMM, InfoSWMM | Tagged , | Comments Off on InfoSWMM and H2OMAP SWMM and their Relationship to FEMA Approved SWMM 5 Engines – Updated for 2017

Advanced Calibration Graphs and Advanced Reference Graphical Comparisons in InfoSWMM 13 to v14.6+

Posted on November 30, 2014 by Robert Dickinson

One of the most valuable tools in any simulation program is the ability to compare monitored and predicted data.  The new InfoSWMM v13 excels in its ability to effectively compare monitored and predicted data, the results of different scenarios and … Continue reading →

Posted in H2OMAP SWMM, InfoSWMM | Tagged , , | Comments Off on Advanced Calibration Graphs and Advanced Reference Graphical Comparisons in InfoSWMM 13 to v14.6+

Top Ten Advantages of InfoSWMM Over SWMM5 for Modelling

Posted on July 9, 2014 by Robert Dickinson

I have been working on the various versions of SWMM since 1980 when I was a co-author and co-developer of SWMM3, a co-author and co-developer of SWMM4 in 1988 and a co-developer of SWMM 5 from 2002/2006.   I have … Continue reading →

Posted in H2OMAP SWMM, InfoSWMM | Tagged , , | Comments Off on Top Ten Advantages of InfoSWMM Over SWMM5 for Modelling

InfoSWMM 14.5 Update 8 (Multiple Languages) is Now available for User Download – Update for 2017

Posted on July 30, 2013 by Robert Dickinson

I am Updating this post for the new InfoSWMM v14.5 Update 8 for April 20, 2017,  This update has the new EPA SWMM 5.1.012 engine and RDII Analyst v2. Please note that the latest releases of InfoSWMM 14.5 Update 8 … Continue reading →

Posted in H2OMAP SWMM, InfoSWMM, Updates | Tagged , , | Comments Off on InfoSWMM 14.5 Update 8 (Multiple Languages) is Now available for User Download – Update for 2017

Transforming the Coordinate System for an Innovyze Model

Posted on November 2, 2012 by Anthony Wisdom

This Workflow Summary details how to transform the coordinate system for an InfoSWMM Model. This technique also applies to InfoWater and InfoSewer models. Both the coordinate system name and the geometry of features (i.e. x and y values) will be … Continue reading →

Posted in InfoSewer, InfoSWMM, InfoWater | Tagged , , | Comments Off on Transforming the Coordinate System for an Innovyze Model

Drawing features to show multiple attributes in InfoSWMM

Posted on October 22, 2012 by Robert Dickinson

Your network data usually has a number of different attributes that describe the features it represents (Figure 3). While you’ll commonly use one of the attributes to symbolize the data—for example, showing one quantity in the InfoSWMM Map Display —you may … Continue reading →

Posted in InfoSewer, InfoSWMM | Tagged , , | Comments Off on Drawing features to show multiple attributes in InfoSWMM