Tag Archives: InfoWorks ICM

InfoWorks ICM Suite and ICM Executive Suite

The ICM Suite and ICM Executive Suite are two extensions we offer for InfoWorks ICM.  They comprises of four advanced modelling tools, which dramatically extend the capabilities of a basic InfoWorks ICM modelling licence. The modules within ICM Suite are: … Continue reading

Posted in InfoWorks ICM, Updates | Tagged , , , , , , | Comments Off on InfoWorks ICM Suite and ICM Executive Suite

InfoWorks ICM : Soft Licence Key Selection Method

If you have multiple Soft Licence Keys for InfoWorks ICM it’s likely that they will all be hosted by a single instance of the Innovyze Floating Licence Manager (FLM). The end-user accesses a particular floating licence key by referencing its … Continue reading

Posted in Information Technology, InfoWorks CS | Tagged , | Comments Off on InfoWorks ICM : Soft Licence Key Selection Method

InfoWorks ICM : Network Dongle Selection Method

If you have multiple Network Dongles for InfoWorks ICM they can all be hosted in the same physical server. The end-user accesses a particular device by referencing the dongles Hardware Serial Number.  This is a unique 10 digit number set … Continue reading

Posted in Information Technology, InfoWorks ICM | Tagged , | Comments Off on InfoWorks ICM : Network Dongle Selection Method

Floating Licences : Network Dongles vs. Software Keys

Floating licences can be deployed via either Hardware Locks (Network Dongles) or our in-house software based authentication system. Some consider that Hardware Locks provide a more robust solution for organisations with complex network infrastructure and they are currently the preferred solution … Continue reading

Posted in FloodWorks, InfoNet, InfoNet Mobile, Information Technology, InfoWorks CS, InfoWorks ICM, InfoWorks RS, InfoWorks SD, InfoWorks WS, IWLive | Tagged , , , , | Comments Off on Floating Licences : Network Dongles vs. Software Keys

Hydraulic Gradient Line and Total Energy Line

In version 4.5 of ICM there was new functionality introduced that would place a new trace on long section views for results. The existing hydraulic gradient line still exists, shown as a blue line indicating the water surface level, in … Continue reading

Posted in InfoWorks ICM | Tagged | Comments Off on Hydraulic Gradient Line and Total Energy Line

InfoWorks ICM v6.5.2 (Build 13012) is now available for user download

InfoWorks ICM v6.5.2 (Build 13012) is now available for user download ICM Workgroup Client Innovyze Workgroup Client 6.5.2.13012 Setup (x86 and x64) ICM Remote Agent Innovyze Remote Agent 6.5.2.13012 Setup (x64 only) Workgroup Data Server Innovyze Workgroup Data Server 6.5.2.13012 … Continue reading

Posted in InfoWorks ICM, Updates | Tagged , | Comments Off on InfoWorks ICM v6.5.2 (Build 13012) is now available for user download

Retirement of InfoWorks CS is now complete

The formal announcement of the retirement of InfoWorks CS was made on the 1st December 2014, following the successful introduction of InfoWorks ICM SE (Sewer Edition) in 2013. Press Release: Innovyze Retires InfoWorks CS with Launch of More Powerful Next-Generation … Continue reading

Posted in InfoWorks CS, InfoWorks ICM, Updates | Tagged , , | Comments Off on Retirement of InfoWorks CS is now complete

Dealing with ‘Error opening ground model’ errors

When meshing it is possible that the user will encounter an error stating that the ground model cannot be found.  This takes the form of the following 2 error messages for a Ground Model Grid and a Ground model TIN … Continue reading

Posted in InfoWorks ICM | Tagged , | Comments Off on Dealing with ‘Error opening ground model’ errors

Surcharge State

There have several questions relating to surcharge state recently. The information below shows how the values are calculated. The software calculates the surcharge state based on the following methodology. <1 – Water is below the soffit at both ends of … Continue reading

Posted in InfoWorks CS, InfoWorks ICM | Tagged , , | Comments Off on Surcharge State

Setting up Simulation Servers for InfoWorks ICM

InfoWorks ICM Simulations – is it best to use one very powerful Server, or many high-specification Workstations? When it comes to the setup of Simulation Servers for InfoWorks ICM, many people believe that one centralised, very powerful, server is the best … Continue reading

Posted in Information Technology, InfoWorks ICM | Tagged | Comments Off on Setting up Simulation Servers for InfoWorks ICM